CLOSED SHUTTLE WORKTABLE LASER CUTTING MACHINE
Laser engraving machine

How to maintain the high temperature laser in summer

With the arrival of summer, the high temperature and humid environment pose a lot of challenges to the stable operation of the laser.As a kind of precision optical equipment, the performance and life of a laser are directly affected by the use environment and mode of use.Therefore, scientific maintenance and maintenance of the laser in the summer is essential to ensure its normal operation and extend its service life.

1. Maintain a suitable working environment to prevent condensation

First of all, make sure that the working environment in which the laser is located is dry, ventilated and the temperature is appropriate.High temperature and humidity in summer can easily cause moisture or overheating of the internal components of the equipment, which in turn affects the stability and accuracy of the laser.Therefore, it is recommended to place the laser in a dedicated computer room with a temperature controlled at 20-25℃ and a humidity of 40%-60%, avoid direct sunlight, and regularly clean up the dust and debris in the computer room to ensure air circulation.

2. Clean the lenses and optical components regularly

The lens and optical components of the laser are its core components, which directly affect the quality and stability of the laser beam.In summer, due to the high humidity in the air, the lenses are easily contaminated with water mist and dust.Regularly use special lens paper or dust-free cloth dipped in a small amount of anhydrous ethanol or special detergent, and gently wipe the surface of the lens and optical components to ensure that they are clean and dust-free.

3. Check the cooling system

Check the cooling system.Including the cleanliness and integrity of fans, heat sinks, water cooling pipes and other components.Ensure that the liquid level of the coolant is normal, the quality is good, and the cooling pipeline is free of clogging and leakage.Replace the coolant regularly to ensure its good cooling effect.

4. Pay attention to the stability of the power supply

The stability of equipping the laser with a power supply is also essential for the operation of the laser.In summer, due to the increase in electricity consumption load and the influence of weather factors such as lightning, power grid fluctuations may be more frequent.Therefore, it is recommended to equip the laser with a stable power supply, such as UPS uninterruptible power supply or regulated power supply, to ensure that the equipment can still operate stably when the power grid fluctuates.

5. Reasonable adjustment of use time and intensity

During the high temperature period in summer, the use time and intensity of the laser should also be appropriately adjusted.Long-term high-load operation will cause the internal temperature of the equipment to increase and accelerate the aging of components.Use it strictly in accordance with the laser operating procedures to avoid overheating caused by long-term continuous work.